Re: 1960 CD 17 5.5hp Johnson Recoil

Home › Forum › Ask A Member › 1960 CD 17 5.5hp Johnson Recoil › Re: 1960 CD 17 5.5hp Johnson Recoil

May 11, 2018 at 2:51 pm #75783
Mumbles
Participant

    There may or may not be an alignment pin or dimple on the end of the spindle, #6. If there is, it has to be aligned with the corresponding alignment hole in the starter housing. Misalignment will cause all sorts of problems. If all is well, the centre screw can be tightened as much as you want.