Re: 1932 Johnson K-50 Points Adjustment

Home › Forum › Ask A Member › 1932 Johnson K-50 Points Adjustment › Re: 1932 Johnson K-50 Points Adjustment

May 5, 2018 at 12:59 pm #75387
squierka39
Participant

    US MEMBER PAY BY CHECK

    Yes. Look under your flywheel for a small groove on the outer edge. Next look on the mag plate for a matching groove. When lined up the points should be just breaking. Works the same as the OMC tool and it’s repro made for the 50’s vintage motors. If your familiar with that tool, do this the same way using a multi meter. Do you have two holes in flywheel? If so one of them will line up for adjusting when the marks are lined up. This way they will be synchronized.