Re: 40HP Scott Atwater 1957

[David Stanton]

If you measure the shaft diameter and the bore diameter the seal is pressed into, you will likely find something at the site below. If you can find a Scott part number, and if Chicago Rawhide made it (which is very likely) the 2nd link below is the manufacturer’s cross-reference site. Chicago Rawhide is now SKF.
Dave

Look up here with dimensions:

http://www2.chicago-rawhide.com/popup_parts_lookup_457010.htm

or Put the Scott part number in here:

http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm