Re: Johnson Evinrude 9.9/15 lower unit interchange

Home › Forum › Ask A Member › Johnson Evinrude 9.9/15 lower unit interchange › Re: Johnson Evinrude 9.9/15 lower unit interchange

April 14, 2018 at 4:36 pm #73969
rudderless
Participant

    I had bought a powerhead gasket kit from somewhere…4years ago…for my 76 and the distructions explained this. I also slid the newer seal head over the shaft before assy to be sure I was reading them correctly. The oring groove did not catch the seal…it slid right over it just fine.

    …I wouldn’t s4it ya…you are too big a turd! 😉