Home › Forum › Ask A Member › impellor › Re: impellor
April 13, 2018 at 1:32 am
#73891
This is one of those topics like fuel mix ratio’s. Everybody does something a bit different. When I get a new to me motor, I open it up and "Usually" change the impeller. I have opened up 60 year old motors that have had better impellers than 10 year old motors. Go figure.
Once I change one that I am going to keep, I figure I won’t be in there again unless it shows it is not pumping. I run in fresh water only and stay out of the sand/silt.
If I was working offshore and depended on the motor for safety, I might be inclined to change them more often.
I ALSO DON’T USE CHEAP IMPELLERS!!!!