Home › Forum › Ask A Member › 1939 Thor / Sea King Magneto, etc. › Re: 1939 Thor / Sea King Magneto, etc.

#73858
Buccaneer
Participant

    US Member
    quote bobw:

    Buccaneer- looks really good!! Can’t answer your questions on the handle or plug but was just wondering if you finally got the crank binding issue resolved?

    Bob, After I spun it power head with a drill for a while, it loosened up some.
    I added a leather seal above the upper main bearing (where there
    was no seal before) and it was snug as well.
    The lower unit kept the original brass bushings, but I replaced
    the crumbling cork seals there with leather ones. The lower
    unit seems a little "stiff" as well, and when I got it attached
    to the power head I was afraid it was going to be a problem.
    But my fears eased when I put the flywheel on and spun it by
    hand, it seemed decent. Next day I attached the cylinder and
    piston, and the flywheel "rebounds" backward under compression
    while spinning the flywheel by hand, so I think I’m okay!

    Prepare to be boarded!