Re: T2Stroke

[Don]

OK, so you are saying that in this picture, the throttle cam is NOT touching the roller? Kinda looks that way…Are you also saying that it appears as though one of the throttle plates is cracked open slightly? If so, this will surely caused sneezing at idle/low speeds. I can see that someone has backed the throttle roller/cam pick up adjustment screw all the way to the bottom of its travel.
Do me a favor and back off the long idle stop screw (long SS screw towards the top of the throttle arm) out a few more turns to ensure this cam is NOT touching the roller, then we can sync the three carbs properly….Don