Re: 1962 Johnson 3hp Seahorse

Home › Forum › Ask A Member › 1962 Johnson 3hp Seahorse › Re: 1962 Johnson 3hp Seahorse

April 9, 2018 at 8:08 pm #73696
David Stanton
Participant

    US MEMBER PAY BY CHECK

    I’ve put a couple Sierra head gaskets in JWs, and they worked fine, and of course, the OEM ones will work great too. OEM is always preferred. Be sure to torque the head bolts properly to avoid warping the head. A manual I have specs the torque at 60 to 84 Inch-pounds. Always tighten the bolts near the center of the head first.
    Dave