Re: QD19 running a little hot?

[beerman57]

I took a pic of the 1962 ten hp I’m also rebuilding, but I can’t / don’t know how to reduce their size so I could post them. The ’62’ is pretty much identical to the ’58’ at the base of the P/H. I wonder if it’s possible to have a head gasket that isn’t letting in or out of the exhaust cover. But all the water leaving the P/H goes in the cavity in the mid where the telltail hole is, and that’s separate from the exhaust gas cavity. The P/H is back on, but I can put my hose on the water tube and listen for water going through the exhaust cover. Probably will end up pulling the P/H again!!