Re: 1937 Sea King ~ Thor 2.4 hp crankcase seals

Home › Forum › Ask A Member › 1937 Sea King ~ Thor 2.4 hp crankcase seals › Re: 1937 Sea King ~ Thor 2.4 hp crankcase seals

April 4, 2018 at 8:50 pm #73458
Buccaneer
Participant

    US Member

    Good idea on the "stepped" key Tubbs.
    I’ll have to remember that one for the future.
    I ended up JB Welding the key in place today.
    After it cures, I’ll address the slop on the crankshaft
    taper.
    I have seal on the upper crankshaft bearing now,
    so air leakage should be minimal.
    Hopefully Thorwald and Carl would approve.

    Prepare to be boarded!