Re: QD19 running a little hot?

[beerman57]

The P/H is still off, the water leaves the P/H in one spot at the rear – into a separate cavity that is the "telltail", anyway that’s what I call it. The exhaust gases go down the mid in front of that and it’s separate. Here is what I REALLY don’t get – if the P/H isn’t overheating, why should anything else be overly hot? Next time I run it on the boat I’ll take the cowl off and check the head for heat right after coming down off plane, but it runs on a hose OK.
In my original post, I had my flusher turned to the back of the water inlet and it got a little hot, after turning it around and putting water straight into the passage to the pump, no problem.