Re: Shift linkage on a 57 bell boy with 57 Johnson 35 hp

Home › Forum › Ask A Member › Shift linkage on a 57 bell boy with 57 Johnson 35 hp › Re: Shift linkage on a 57 bell boy with 57 Johnson 35 hp

March 15, 2018 at 10:29 pm #72548
chris-p
Participant

    I would:

    1. Disconnect cables and run motor. If still acting up, the problem is NOT in the cables or control box.

    If still jumps out of gear with cables disconnected and manually shifted, either…

    a. The shift rod needs adjustment behind the oval door on leg of motor.
    b. The shift handle needs to be adjusted.
    c. The gears and or clutch dog is worn
    d. There is an issue inside gearcase such as cradle, etc….