Re: To Hone or not to Hone is the Question

Home › Forum › Ask A Member › To Hone or not to Hone is the Question › Re: To Hone or not to Hone is the Question

March 13, 2018 at 11:53 pm #72461
Pondrocket
Keymaster

    Lifetime Member

    FYI

    "Use Flex-Hone oil. You need to use the proper oil to hold the silicone carbide residue in suspension so it can be cleaned out. You must clean out you cylinders with Hot soapy water only. Never use a solvent like Gas, Kerosene or degreaser on your cylinders under any condition at any time." from Harry Brinkman.

    Travis

    Travis