Re: 1954 7-1/2 Evinrude lower unit

Home › Forum › Ask A Member › 1954 7-1/2 Evinrude lower unit › Re: 1954 7-1/2 Evinrude lower unit

June 13, 2015 at 8:52 pm #18082
rjoynt
Participant

    US MEMBER PAY BY CHECK

    The casting is not cracked. Someone has been in the lower unit before. The flange by the prop seal was sticking up instead of being down. Maybe it was glued in previously.
    I was thinking; what if I were to put in some small wire between the plug and the housing?