Re: Help With a Martin 75 Twist Shift Neutral Clutch

[Tubs]

Thanks hiram1914 for the copy’s from the parts manual.
They look to be similar if not the same as what Buccaneer
posted. I did try pulling up on the rod Tom but no luck.
Before I took it apart I could turn the prop backwards
with out the flywheel turning but not forward so the
drive shaft must be split in there somewhere. It may just
be stuck. The recoil was stuck and wouldn’t engage and
both butterflies in the carburetor were stuck. I think
I’ll take off the drive shaft gear and try slipping everything
out hoping it all stays together I don’t understand how it
works from the diagram. Maybe it will make more sense
when I get it all out. Thanks again.

A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.