Re: 7.5 evinrude

Home › Forum › Ask A Member › 7.5 evinrude › Re: 7.5 evinrude

March 6, 2018 at 9:49 pm #72068
jerry-ahrens
Participant

    US MEMBER PAY BY CHECK

    I’ve reused the base gasket many times. As long as it’s not broken or torn up, you can coat it with some Permatex #2 sealer and go with it.
    I would replace the cork seal on the upper end of the driveshaft, as well as make sure the correct spring and cup washers are present. Very important on that motor.