Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP
March 3, 2018 at 12:41 pm
#71896
quote crosbyman:
from reading the maze of words it seems all coils are ok.. continuity wise anyway one set at around 6 kohms and a new pair at 103 kohms…
he is using the FR tool so points should just begin to open a TDC… no need to worry much about .020 gaps anymore
he is using the FR tool so points should just begin to open a TDC… no need to worry much about .020 gaps anymore
true could still be bad coil but out of 4….. 2 should… work
the initial coils got replaced due to the wrong scale used on the VOM scale which was set at…. 2000 ohms
my readings have been hard to keep up with because I was performing them wrong at first, using the right method and test but on the wrong ohm setting all along
I wonder sometimes if auto ranging digital meters and timing pointer tools are too confusing for the novice? (No offense to T. Bell) Some people just want to get grandpa’s fishing motor running again, so I think we should keep it simple.. gap em at .020 and go with it. Just my opinion, respectfully.