Re: Help with 65′ Evinrude Fisherman 6HP

Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP

March 3, 2018 at 4:31 am #71891
JACQUES
Participant

    from reading the maze of words it seems all coils are ok.. continuity wise anyway one set at around 6 kohms and a new pair at 10.3 kohms…
    he is using the FR tool so points should just begin to open a TDC… no need to worry much about .020 gaps anymore

    true could still be bad coil but out of 4….. 2 should… work

    the initial coils got replaced due to the wrong scale used on the VOM scale which was set at…. 2000 ohms

    my readings have been hard to keep up with because I was performing them wrong at first, using the right method and test but on the wrong ohm setting all along

    Joining AOMCI has priviledges 🙂