Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP
March 2, 2018 at 10:18 pm
#71859
quote fleetwin:
ok, gotta admit that I’m confused also…Two sets of coils, kinda hard to keep up with your resistance readings…
So, did similar coils give similar readings? What was wrong with the original coils? Sorry for not following along more closely…
OEM coil resistance specs have changed so much over the years, it is hard to know just what the right spec is. Once you throw in outside vendors, well the possibilities expand even more….
So, did similar coils give similar readings? What was wrong with the original coils? Sorry for not following along more closely…
OEM coil resistance specs have changed so much over the years, it is hard to know just what the right spec is. Once you throw in outside vendors, well the possibilities expand even more….
Sorry for the confusion, if you had been you’d probably be more confused hahaha it’s starting to hurt my head so trust me I’m in the same boat but I think I’ve got a grasp on it since crosbyman and everyone else have been so helpful! Now to sum it up as best I can, my readings have been hard to keep up with because I was performing them wrong at first, using the right method and test but on the wrong ohm setting all along 😳 I THOUGHT the old ones were shot because I had preformed the test on them wrong! Old coils gave similar readings in the 6’s I think and new coils tested around 10.3 ohms.