Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP
March 2, 2018 at 9:05 pm
#71852
quote outbdnut2:
Just to be sure you have checked everything, swap the condensers and see if the spark moves to the other cylinder.
I’ve seen a lot of spark plug wires measure “open” that still work – usually due to the spark plug connector on the end of the wire being not quite connected right to the wire, but spark voltage usually will jump to it anyway if the gap isn’t too big, but ohmmeter reads open. – same can happen where the other end of the wire goes into the coil.
Dave
Thanks Dave I appreciate it a lot when I put it all back together I’ll try switching them for giggles but they’re both new too, I think I must have done something else wrong or something rather along the line