Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP
Hmmmm well then… VERY MUCH appreciated crosbyman, i have been testing for the wrong number all along 😳 😯 😡 I’m an idiot! (Facepalms) i had a sneaking feeling that was going on! How misleading that is if you don’t know your way around a meter! He said "and it’s buried the needle" so I figured it was pinned all the way! So then when I touch my electrodes to the primary winding wires they pin up all the way too (that is only touching them for a for a Split Second AS I’VE BEEN DOING PREVIOUS) but now after holding them for a few seconds it zeros out to triple zeros, THIS IS WHAT IM LOOKING FOR CORRECT? Although i should be getting a reading of voltage and then 0 ohms when checking secondary windings? although I have a very basic understanding of how the meter and electricity work but im not a professional with it. I knew ohms measure resistance and the meter must checks and pushes voltage but that’s about it lol