Re: Evinrude 1957 5.5 HP Gear Case Questions

Home › Forum › Ask A Member › Evinrude 1957 5.5 HP Gear Case Questions › Re: Evinrude 1957 5.5 HP Gear Case Questions

June 12, 2015 at 9:26 am #18028
david-bartlett
Participant

    Mondo,

    That upper grommet is not as bad a job as it might seem. Some long needle-nose pliers, or a piece of threaded rod with a nut on it to push against the grommet will do it. Just get the tabs on the new grommet lined up with the holes in the gearcase, and use a little grease. Nothing to it.