Re: Help with 65′ Evinrude Fisherman 6HP

Home › Forum › Ask A Member › Help with 65′ Evinrude Fisherman 6HP › Re: Help with 65′ Evinrude Fisherman 6HP

February 25, 2018 at 2:38 am #71562
jerry-ahrens
Participant

    US MEMBER PAY BY CHECK

    Gosh, I’m sure we can come up with the oiler wick holder without having you shell out big bucks. If Ed Elliot sees this, I’ll bet he can take care of you. And yes, there is only one wick required. You can set your points if you use a .020 feeler gauge to carefully measure the gap while on the ”high”side of the cam, usually marked as such. The flywheel will need to be torqued to spec. Someone will post that, as I don’t remember off hand..
    I know I continually harp on not using Sierra Points, but I would recommend only using BRP Johnson Evinrude points and condensors.