Re: 1963 Evinrude Sportwin Skeg Pin

Home › Forum › Ask A Member › 1963 Evinrude Sportwin Skeg Pin › Re: 1963 Evinrude Sportwin Skeg Pin

February 21, 2018 at 3:15 am #71407
david-bartlett
Participant

    Lew,

    The last guy that was in there didn’t know what the pin was for. There is a corresponding hole in the bushing to keep it in the proper orientation on assembly. Best bet is to drill a new hole for a new pin in each piece, unless you can remove the pin and re-set it to the proper depth. Others have done this and will chime in.