Re: yet another 15hp question

[johnyrude200]

That’s a good idea Dan. I’ve been researching inexpensive options for a temperature sensor for the older motors. I’ve found some on eBay which are pretty low cost (like $5), my only hang up is how to attach it to a cylinder. I was thinking of just using some silicone and gluing it on, since silicone is good up to 600°. I can then run the wire out of the pan and onto something I can see while underway; now just to figure out if the LCD gauge can handle exposure to the elements!

Sure would be helpful in avoiding overheat/seize conditions.