Re: If I have a wiring error, I simply can’t find it…

[Don]

quote crosbyman:

fleetwin… he indicated the kill function works fine with 2 wires shorted including vacum cut-off, mercury etc…

the issue creeps in when the switch is involved hence my request to find out what is happening switch side wire to wire ohms

individual wires to ground ohms…….in kill mode and run mode ohms readings

OK, well this is where I’m confused and need clarification for sure. It sounded to me like he disconnected the two knife connectors from the leads coming out from under the mag plate, then connected them to each other. If this is the case, then the vacuum switch and wiring were not in the circuit when he connected the stop leads together….