Home › Forum › Ask A Member › 1948 3.3HP Evinrude Parts Diagram › Re: 1948 3.3HP Evinrude Parts Diagram
January 18, 2018 at 1:52 pm
#69854
that float "looks" like the TN27 float….. could the mercury float be used ?
Dan had suggested the following … (My TN27 float was in great shape so I am just going to reseal it for now)
Get you a Sierra #18-7208 float. Same as Mercury #1395-8673. Works great & you don’t have to coat it or anything. Slight modifications. Just drill out the center to remove the little spring for the center rod & add the hole for the screw to hold the plate to set float heigth. Best way to go & cheap.
Joining AOMCI has priviledges 🙂