good point I assumed the vertical shaft would have just pulled out but removing that side nut will do if the whole thing can be pulled up with the tank
the fuel valve T handle also need to be taken out to snake it up trough the frame supporting the thank . I disconnected the neutral shift cable
next step is changing plug wires and points …points may still be good if not to pitted….or worn on the rub block
we’ll see as I work myself in this oldy.
thanks
UPDATE….. the nut did it fine Frank…… fuel tank is off ! digging in 🙂
Attachments:
Joining AOMCI has priviledges 🙂