Home › Forum › Ask A Member › kill switch for oldies › Re: kill switch for oldies
true but it says CAR momentary switch which to me should be normally open with momentary CLOSING contacts ex: horn button switch
current wise I am not overly worried as it will simply carry a ground from one point set to the other to kill it while being in a closed state … I suspect any current will not be so great… as to damage the switch .
Sparking wise I think the condensers will gobble some of the surge as they normally do to protect from arching across the points
THe switch is destined for " Car" use so I assume it capable of handling the load
I wont be punching holes my engine base before I can test this switch ! I figured for $7.52 no big deal
the 10 pack units look identical to my purchase
the10 unit pack for $25 says….
momentary type, push it– on, release it — off .
Mounting Cut Hole: 16mm
Max Switch Rating: 3A/250VAC
Terminal Type: Screw
Fully submersible for up to 30 minutes without damage
Joining AOMCI has priviledges 🙂