Home › Forum › Ask A Member › Think I ruined my RD-23 lower gear case housing › Re: Think I ruined my RD-23 lower gear case housing
January 2, 2018 at 10:49 pm
#69200
If that picture is looking up from the bottom and that is a brass bushing showing, then you are doing right. Screw a bolt into it, then go to the top and use a suitable rod or bunch to knock it out. Rod or punch that you are using must not be too big to go through the 1/4" hole in the aluminum casting, or you will break it. It is kind of thin, right above the brass bushing. In all my years, I’ve never seen one that wouldn’t come out.