Re: Hit a Log this Morning

Home › Forum › Ask A Member › Hit a Log this Morning › Re: Hit a Log this Morning

June 6, 2015 at 3:05 pm #17698
Mumbles
Participant
    quote Drifter:

    I don’t think so as the prop hub is a solid cast piece and the shear pin passes through this solid cast hub.

    You are correct Drifter and your prop is solid with no rubber hub in it.

    I would strongly suspect the shock absorber is slipping. If you mount it in a vice and grab the other end with a pipe wrench, you can see how much torque is needed before it slips. 6 11/16 is a good measurement.