Re: OMC Flywheel puller screw spacing

Home › Forum › Ask A Member › OMC Flywheel puller screw spacing › Re: OMC Flywheel puller screw spacing

December 1, 2017 at 2:15 pm #68160
vintin
Participant

    Ben it looks like it is 1 and 7/8" on an RD. Don’t know if it is the same size as what the motors you are searching for.

    or 1.875".

    That was eyeballing it with a tape measure.

    I got 15/16" center of the crank to center of one of the bolt holes.