Home › Forum › Ask A Member › Johnson A-25 driveshaft removal › Re: Johnson A-25 driveshaft removal
Tom, thanks for quick reply…the power head is removed, the pump is disconnected, as is the cavitation plate, 3 screws. The drive shaft is loose in the tube/leg, meaning I can move it around, and I see where it could interfere with the 2 water tubes. The drive shaft top still has what looks like a blade in it; which doesn’t look like it would interfere if turned correctly. At the bottom with the 3 screws are remove and the tube/leg partially rotates on the lower unit…but you can’t move it up. Do you think I should use a little more force? seems like it should start to come off? The tube/leg was brazed at one point but doesn’t look like it is causing a problem…what next???