Home › Forum › Ask A Member › 17/64" bolt size? › Re: 17/64" bolt size?
November 21, 2017 at 3:27 am
#67732
There are 2 common 1/4" and 2 not so common
coarse 20tpi, intermediate 24 tpi fine 28 tpi and super fine 32tpi
It may be the 1/4"x 24tpi is what you have. I have a tap in that size that is too big for
1/4" drill gauge and a loose fit in 17/64" hole.
Making a replacement from a sample would be basic lathe task
Finding a correct screw may be possible…others here may know where to start.
Louis