Re: New Tool

[A. Hoskins]

I have both hammered out gaskets and traced the outline onto gasket material if I had an old gasket to work with. Either way, I do the final cut with a #11 Exacto and I work on a sheet of plate glass. I finish the job with a small sanding drum on my Dremel as necessary. I make the holes with either hole punches or brass shell casings but I don’t punch them. I like to spin the tools with my drill press and basically drill the holes out with a piece of hardwood as a backing plate. This makes for a real clean job. From time to time, the hole punches can be sharpened up with a hand reamer.

Certified JB weld