Re: Help Please on Lightwin Carb issue?

[Don]

OK, well it seems to run pretty well, didn’t seem to be hard to start…
The only thing I noticed was that it didn’t seem to slow down too much when you revved it to WOT then cut back to start position quickly. Did anyone else notice this, or is it just my imagination. Are you sure the carb linkage is free/not binding. How about the throttle cam, these get bent back easily if the throttle plate had been stuck at some time earlier. I know you mentioned that the cam pick up is correct, so I guess the throttle cam isn’t an issue, but it just seems to be running kinda fast in the start position.
Let’s see what others think….