Home › Forum › Ask A Member › confused as hell using a timing fixture on a low-tension magneto › Re: confused as hell using a timing fixture on a low-tension magneto
Of course, 5 mins after the last post I put up, what I found is to disregard the T & B stampings on the fixture. It is the opposite of the stampings when the cam hits the respective set of points, due to the low tension magneto function. Hope this makes sense…will know when I go to fire the motor off for the first trial. Started this morning at 9:30 and built a 9.9 from scratch from the ground up. If all works well, it’ll get a full makeover tomorrow and look/run as good as new.
I can say the spark is jumping 3/4 inch right now…so unless timing is wrong, I expect it to at least pop off!