Home › Forum › Ask A Member › photo of boat-side connector for OMC 18/20/25 electric start? › Re: photo of boat-side connector for OMC 18/20/25 electric start?
If you post a "Wanted" ad on the classified board here, someone will likely have an original plug with harness at a reasonable price. It may also have the key ignition switch and a key with it along with the solenoid box. Give it a try – ads are free.
I’d be wary of a 3D-printed connector – there is a lot of vibration and flexing there and 3D print material may not hold up. Also – making and fitting contacts into a 3-D printed connector will likely be a real challenge.
If you live anywhere near Minneapolis area, you can drive over and look at the connector and harness on my boats.
Dave