Re: 1950 Firestone 10-A-73, 5hp Runs!

[Buccaneer]

Gary, The seals I bought individually after measuring bore and shaft sizes, etc.
I look up what’s available at
http://www2.chicago-rawhide.com/popup_p … 457010.htm

then just search for the cheapest source. The needle bearings all have numbers
on them that are still used. Amazon.com was a good source for those.
I bought an O-ring kit off of Ebay last year with a good selection of sizes…..
Has come in very handy! I lucked out with the coils being good.
Ended up using condensers for a 1970’s Madza / Ford that were the correct
mfd. value.
Good luck with your project,
Bucc

Prepare to be boarded!