Re: Removing Flywheel KG4 no threaded holes in flywheel

Home › Forum › Ask A Member › Removing Flywheel KG4 no threaded holes in flywheel ‘Updated’ › Re: Removing Flywheel KG4 no threaded holes in flywheel

September 29, 2017 at 9:06 pm #65570
John Schubert
Participant

    Lifetime Member

    Drill & tap where the metal plugs are & use a standard puller. Hammering on top of the crank even with 2 nuts you can damage the crank & even more so, the sintered metal cam that opens & closes the points.