Re: 1949 Zephyr Timing TDC

Home › Forum › Ask A Member › 1949 Zephyr Timing TDC › Re: 1949 Zephyr Timing TDC

September 19, 2017 at 6:13 pm #65135
Tubs
Participant


    The plugs fire when the points open.
    Bring a piston up to TDC and move the mag from
    the slow position till the point open for that cylinder.
    Not familiar with that mag but this should be at the access
    point where you set the points if they are set through a
    hole in the flywheel. If you can see the points open with
    the flywheel off that makes it somewhat easier.

    A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.