Home › Forum › Ask A Member › Oil leak screws in lower/upper gear cases Model 10014 Evinrude 10 hp › Re: Oil leak screws in lower/upper gear cases Model 10014 Evinrude 10 hp
September 17, 2017 at 10:40 am
#65017
Follow Fleetwin’s advice and after you have run a few tanks of gas drain it. Examine the drained oil and see if there are water droplets in it. If there are only a few just remember to drain maybe a couple of times a summer and at the end of the summer. Depending on wear it is difficult to get it all tight but If there is a lot of water you will need to reseal.