Re: 1963 Fastwin Upper Water Tube Grommet Replacement

Home › Forum › Ask A Member › 1963 Fastwin Upper Water Tube Grommet Replacement › Re: 1963 Fastwin Upper Water Tube Grommet Replacement

September 15, 2017 at 11:36 am #64913
david-bartlett
Participant

    Hey Lew,

    Welcome and keep posting. Good question. What I do is take a piece of 5/16 threaded rod and thread a nut on a bit to push the grommet up in there with. It is easier than you think to get it right. Put a little grease on the grommet and it will slide right in. Easy enough to get it out and try again if it doesn’t line up.

    Others will chime in on their own favorite methods.