Re: Big Twin 35 gear case to oil retainer dowel.

Home › Forum › Ask A Member › Big Twin 35 gear case to oil retainer dowel. › Re: Big Twin 35 gear case to oil retainer dowel.

September 14, 2017 at 4:02 pm #64874
chinewalker
Participant

    US Member

    I’ve actually had luck drilling them out from the other side. Drill a hole, aiming for the top of the pin. Watch your metal shavings – they’ll change when you hit the pin. Once there, use a punch to drive the pin out from the side you drilled. Fill the hole with JB Weld or Marine Tex epoxy and set a new pin in place before the epoxy sets.