Re: CD-19 Shock absorber?

[amuller]

There is a thread about this here: viewtopic.php?f=2&t=8276&start=20. And there are others. I would use a tube and press the two sections of the shock absorber housing together until they bottom, which should give you about 6 11/16 as stated above. There should be a little end play as assembled in the leg. There is potential for the housing parts to separate again, of course. Mine hasn’t, but I haven’t hit anything either. I suggest keeping an eye on freedom of rotation. If it seems to tighten up again, you could consider welding or pinning the housing halves together.