Re: The breaker points saga continues and cam play

[jeffersonsharp]

Thanks all for the help. I bent the base to get them contacting parallel as much as possible then filed them a little to clean and square them. I then used a residue free electric parts cleaner and some not too white paper to finish them up. I then adjusted them using the timing tool and got them breaking just past the first timing mark( I made sure to only turn them clockwise, not that the impeller is a concern with the gearcases currently being removed, but to make sure the cam play didn’t cause any errors. I’m getting excited to start these engines for the first time soon. Hopefully by the weekend. Again thanks for all the help. 😀