Re: 1966 CD-23 initial low speed needle setting

Home › Forum › Ask A Member › 1966 CD-23 initial low speed needle setting › Re: 1966 CD-23 initial low speed needle setting

May 30, 2015 at 4:47 am #17181
SCOTT MEYER
Participant

    Thanks guys, I got it running. This is the motor I was refurbing for the 90yr old WWII vet. He loads his Grumman Sport Canoe into the back of his truck and fishes walleye every year. I went through the ignition and replaced the points and caps. I used Frank’s timing tool and got the timing set perfect. Changed the water pump impeller and cleaned/adjusted the carb. Cleaned and gapped the plugs. I also installed new starter cord. Hopefully this will last him many more seasons. It’s a sweet little motor.
    https://www.youtube.com/watch?v=wWf3Jag9NR8