Re: Winterizing

[chris-p]

1. Add stabilizer to fuel tank.
2. Run for at least 10 minutes, to get it through the system.
3. Shoot fogging oil into the carb throat until it dies.
4. Remove plugs, spray some fogging oil into cylinder, manually pull over a couple times to distribute oil.
5. Store vertical. Ensure drain holes are clear of debris.
6. Change gear oil with new crush washers.
7. I mist WD40 over it to help limit corrosion.
8. Wipe off old grease and grime from year, and re grease fittings.
9. Remove prop and ensure no fishing line wrapped around prop shaft.
10. I then remove tiller grip, and all points along throttle system, and re grease to ensure smooth operation.

Good till next year!