Re: Choke switch Evinrude V4 1972 85 hp

Home › Forum › Ask A Member › Choke switch Evinrude V4 1972 85 hp › Re: Choke switch Evinrude V4 1972 85 hp

July 30, 2017 at 12:57 am #62389
amuller
Participant
    quote FrankR:

    The service bulletin says to remove the Purple/yellow choke solenoid wire from the terminal strip and connect it to the screw with the two purple/white wires. Then when you flip the choke toggle, BOTH choke solenoid windings are activated for full choke. Warm-up choke will no longer work. Of course if you like the warm-up feature, leave it as is.

    Thanks. I think I will leave it as is and see how it works. Did OMC identify a defect that makes it desirable to simplify the choke wiring?