Re: 1953 mw seaking 5hp model #35GG-9015A ser#457182

Home › Forum › Ask A Member › 1953 mw seaking 5hp model #35GG-9015A ser#457182 › Re: 1953 mw seaking 5hp model #35GG-9015A ser#457182

July 16, 2017 at 11:34 pm #61722
frankr
Participant
    quote RCO:

    You can use a 277181 OMC or 18-3001 Sierra pump, but you will have to carefully thin it down on a sander. They are the same O.D. and I.D as the original, but a little thicker.

    That is good advice—for an Evinrude 7.5. But for the 5D10 Gale & Johnson TN models in question, use the 3hp-5.5hp impeller by enlarging the center hole to fit the shaft. Original part number was 375688